|
All electronic circuitry will be housed in 19” Euro –inter connections./ complete Electronics will be housed in DIN standard housing. |
|
0 to 20 mA or 4 to 20 mA signal proportional to feed rate, will be a available for external use. |
|
The electrical controls & AC (convertor) drive will be housed in same/ separate, floor standing, main control panel. |
|
Over load trip, current limit, soft start are standard features. |
|
Fault annunciation on alphanumeric display and tripping for following faults. Material starvation, Deviation, Motor over load W/F & P/F, Belt sway, Over speed, Out of range etc. |
|
Settable delay for trip activation of following faults, Material starvation. |
|
Digit resettable, shift totaliser and 8 digit non resettable totaliser, at background. |
|
Self diagnosis with power ON. |
|
Overload setting through software. |
|
Output signal range settable through software. |
|
Capacity Range (Upper and lower limit) settable. |
|
Settings/Programmed data preserved, even if power fails. |
|
Password lock for programmed/setting alterations. |
|
Two line, 16 character Backlit LCD display for displaying all the parameters. |
|
User’s friendly. |
|
“BYPASS” facility - certain non critical faults can be bypassed, through prog. mode. |
|
Calibration procedure simplified. Dynamic calibration (OPTIONAL). |
|
Rugged A.C. Drives. |
|
Circuit breakers for main incoming supply isolation and control supply. |
|
Back up fuse protections for drives. |
|
Reputed make electrical switchgear. |
|
Ultra reliable magnetic Speed Transducer |
|
Group control possible. |
|
RS232/RS485 port |
|
Accuracy 0.5 % |
